Back to sections: PISTON SEALS Scarica scheda in PDF

MAGNETIC COMPLETE PISTONS - SET E001M

GENERAL DATA

DUTY 
Pneumatic cylinders to be used with reed-type magnetic sensors replacing the usual mechanical end of stroke.

Notice: the reliability of the signal depends on the operating conditions, on the cylinder material and on the kind of sensor applied.

EXECUTION 
Magnetic complete pistons are produced with a metal disc working as support and locking. 
The sealing function is carried out by the shaped profile of the rubber or fluoroelastomer part, whose compound assures a low friction level and a long life of the seal itself.
Magnetic complete piston seals are produced all together during the molding process, therefore the installation is much easier and there is no need to assemble various parts.


SET 
E001M set is produced with nitrilic rubber (NBR) and fluoroelastomer (FPM) compounds. 
The codes marked with * are special profiles which can be produced upon request.

RANGE OF APPLICATION

NBR COMPOUND FPM COMPOUND
Temperature  from - 5C up to + 80C ** Temperature  from - 10C up to + 150C 
Pressure max  <= 10 bar Pressure max  <= 10 bar 
Speed  <= 1 m/s Speed  <= 1 m/s 
-
** Upon request the same items can be supplied with a special compound withstanding low temperatures: from - 25C up to + 80C

MAGNETIC FEATURES 
Oriented ANISOTROPIC Plasto-ferrite. 
Residual magnetic flux : 2400 Gs 2%

Next Page / Table of dimensions