DUTY
E001 set replaces, in pneumatic pistons, the usual aluminium cylinder heads, which are equipped with various seals and antifriction bands.
EXECUTION
Complete pistons are produced with a metal disk working as support and locking.
The sealing function is carried out by the shaped profile of the rubber or fluoroelastomer part, whose compound assures a low friction level and a long life of the seal itself.
Complete piston seals are produced all together during the molding process, therefore the installation is much easier and there is no need to assemble various parts.
SET
E001 set is produced with nitrilic rubber (NBR) and fluoroelastomer (FPM) compounds.
The codes marked with * are special profiles which can be produced upon request.
RANGE OF APPLICATION
NBR COMPOUND |
FPM COMPOUND |
Temperature |
from - 5°C up to + 80°C
** |
Temperature |
from - 10°C up to + 150°C |
Pressure max |
<= 10 bar |
Pressure max |
<= 10 bar |
Speed |
<= 1 m/s |
Speed |
<= 1 m/s |
-
|
** Upon request the same items can be supplied with a special compound withstanding low
temperatures: from - 25°C
up to + 80°C
|
|