Back to section: CUSHIONING SEALS Scarica scheda in PDF

CUSHIONING SEALS - SET E0A

GENERAL DATA

DUTY 
Cushioning seals are applied to pneumatic cylinders to allow the end of stroke slowing down.
They operate on two sealing points: the inside lip operates on the rod and the lower part on the groove bottom towards which it is pressed.

SET
E0A... is produced with special nitrilic rubber (NBR) or fluoroelastomer (FPM) compounds which are tested to be highly resistant to deformation.

RANGE OF APPLICATION

NBR COMPOUND FPM COMPOUND
Temperature  from - 5C up to + 80C** Temperature from - 10C up to + 150C 
Pressure max  <= 10 bar Pressure max  <= 10 bar 
Speed  <= 1 m/s Speed  <= 1 m/s 

** Upon request the same items can be supplied with a special compound withstanding low temperatures: from - 25C up to + 80C

Next Page / Table of dimensions