SECTION
Sh/A
bar
°C
m/s
| ROD SEALS / WIPERS | |||||||
| CROSS SECTION |
CODE | MATERIAL | HARDNESS Sh/A |
PRESSURE bar |
TEMPERATURE °C |
SPEED m/s |
|
|
E003T | TPU | 93 | <=10 | -30 | +80 | <= 1 |
|
E0RN | NBR | 88 | <= 10 | -5 | +80 | <= 1 |
| E0RV | FPM | 88 | <= 10 | -10 | +150 | <= 1 |
|
INSTALLATION AND DUTY GUIDELINE.
During installation be careful not to pinch either the outside diameter or the inside lips.
The various parts of the cylinder should not show burrs or foreign matters which could compromise the correct installation and working of the seals
themselves. It is recommended to comply with pressure, temperature and speed stated in this
guideline.
NOTICE.
Performances of seals depend, besides raw material quality and production processes, on various duty
conditions. It is recommended to carry out tests in extreme conditions before placing items in normal use, since a concomitance of critical factors may compromise
their correct working. ELTE snc will keep the right to modify or improve any product without notice.